SPEB-7 ADHESIVE is a Synthetic Rubber based adhesive specially developed to cater various insulation material applications in HVAC & R industry.
Application
Major
Applications :
SPEB-7 ADHESIVE is used for to bonding various insulation substrates like Nitrile Rubber / XPE foam / Glass wool to Galvanized Iron sheet / Aluminum Sheet etc. to provide Insulation to AC Ducts, Chilled Water Pipe Lines, and Reaction Vessels in various Industrial & Residential Projects.
Application
Industries
•
AC Ducting / Chilled Water Piping/ Air Ventilation System - Fabrication of AC ducts - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool to Duct surface
•
Chilled Water piping - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool to MS pipe lines
•
Acoustic Insulation - To Bond Nitrile Rubber to Concrete walls, Vertical surfaces & Duct lining with Nitrile rubber
•
Wall Paneling for cold storages - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock Wool to smooth Concrete wall surface
•
Under deck/Over deck Insulation - To bond Nitrile Rubber, Crossed linked Polyethylene, Glass Wool/Rock
•
Wool to smooth Concrete wall surface (mechanical fasteners are recommended for under deck insulation)
Method of Use
Clean the substrates to be bonded so that they free from Dust/Rust/oil etc.
Stir the adhesive well before use
Apply SPEB-7 ADHESIVE on both the substrates uniformly by spreader/ Brush, First on Non porous substrate & then on Porous substrates.
Allow it to Dry for 2-5 Minutes or till the adhesive becomes "TOUCH TO DRY". Then press both the substrates together ensuring uniform contact so that air pockets are not formed.
Cure for 24 hrs at Room Temperature.
Note
:
Workable bond strength of the joint will be achieved after sometime, but maximum strength will occur only after the solvent has completely evaporated, this takes between 12-24 hours depending on the porosity of the surface.
Precautions
:
1. Keep the containers closed when not in use.
2. Keep away from Heat and Flame as it is a Flammable Liquid.
3. DO NOT INHALE.
4. Keep the adhesive out of reach of Children.
ADHESIVE
