Ans.
Clean both the application surface.
Apply SPEB-7 on both the side
evenly. Allow the adhesive to
dry “TOUCH TO DRY”.
Then unite both the surface and
give even pressure to get a perfect
bond.
NOTE: - Perfect bond will be achieved
only after 24 hours.
How
can I get information about the
chemicals used in making glue
or material safety data sheets(MSDS)?
Contact
us for MSDS.
How
can I remove glue?
Any
remaining residue should be cleaned
with a dampened cloth and Thinner/Solvent.
Repeat applications might be necessary
for more absorbent or lighter
carpeting. Be sure to test the
solution on an inconspicuous spot
before using to be sure there
will be no negative effects on
the product where adhesive is
applied.
Where
can I buy?
SPEB-7
products are carried by a variety
of major mass retailers. In addition,
they can be found in much hardware,
office retail locations. To find
the closest location to buy a
specific product, contact us on
info@speb7.com.
What is the shelf life of the
product?
It
has a shelf life of 10-12 months.
But shake the tin well before
using it. Ensure that the LID
of the tin is closed properly
for longer life of the product.
Is SPEB-7 SOLVENT FREE?
No.
it is not solvent free. But it
doesn’t contain harmful
solvents like benzene. We here
at Speb Adhesives use standardized
raw materials keeping in mind
the help of our workers and consumers.
